6. Powering down FLAIM Extinguisher

Overview

Important Icon Orange.svg

Important: FLAIM Extinguisher should be powered down after each use.

Power down FLAIM Trainer system in the sequence detailed below:

1.

Remove the VR headset from head.

2.

Push and hold the power button for about 5 seconds.

Headset power on button.jpg

The power light will turn off.

3.

Place the VR headset into the Case.

4.

Plug the USB lead into the USB port on the television/projector.

5.

The hose tracker and trigger assembly will automatically power off.

HDMI Receiver Light.jpg

Important Icon Orange.svg

Important: Ensure when you shake the trigger assembly that it doesn't turn back on again. If it turns on, press and hold the power button until it turns off.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more