3. Know the equipment

Important Logo White.svg

Important: FLAIM Extinguisher should be recharged prior to each use.

 

Charging the VR headset

The VR headset is used to provide the user with an immersive training experience with a range of realistic fire scenarios.

10-vr-headset.jpg

 

Complete the following steps to charge the VR headset:

1.

Remove the headset charger from the case.

2.

Plug the headset charger cable into the VR headset.

3.

Plug the headset charger into a power outlet.

Charging the Headset.jpg

 

How do you know when it's charging?

The flashing battery LED indicates the charging level.

VR headset charging Step 3.jpg

 

Note: The VR headset battery can be charged when attached or not attached to the headset. 

Charging the Headset Battery.jpg

It is fully charged when 4 battery LEDs are illuminated.

The VR headset battery should last approximately 2 hours and charge within 1 hour.

 

Charging the controllers

The hose tracker attaches to the end of the hose and is used to interact with the VIVE menus, FLAIM Launcher and scenario items and / or teleport (when the scenario supports it).

Hose Tracker.jpg

 

The trigger assembly is used to activate the equipped suppressant and interact with the FLAIM lobby and scenario items.

Trigger Assembly.jpg

Complete the following steps to charge the hose tracker and trigger assembly :

1.

Remove the USB-C Y splitter cable from the case.

2.

Connect the USB-C Y splitter cable input to the USB Port on the International USB charger.

3.

Connect one USB-C Y splitter cable output to the hose tracker.

4.

Connect the other USB-C Y splitter cable output to the trigger assembly.

Charging the Controllers Lights.jpg

   

How do you know when it's charging?

The illuminated LED indicates the charging level.

  • An amber light means the devices are charging
  • A blue light means the devices are fully charged

The hose tracker and the trigger assembly should last approximately 4 hours and charge within 1 hour.

 

Power buttons

Headset power on button.jpg

Headset

Press and hold to turn the headset on / off.

 

Extinguisher Trigger

Press the △ button to turn on the controller.

Trigger Assembly Controller Power On Button.jpg

Hose Tracker Power On Button.jpg

Hose Tracker

Press the △ button to turn on the hose tracker.

 

Interaction methods

Input - Extinguisher Trigger.jpg

Extinguisher trigger

Use to activate the equipped suppressant, interact with the scenario items, or make selections within the FLAIM menus.

Hose tracker teleport and interact button

Press to interact with the VIVE menus, FLAIM Launcher and scenario items and / or teleport (depending on the scenario).

Hose tracker teleport and interact button.jpg


Headset Side Button.jpg

Headset side button

Press to interact with the VIVE menus, FLAIM Launcher and scenario items and / or teleport (depending on the scenario).

 

Headset controls

Headset volume controls.jpg

Headset volume controls 

Press either end to adjust the volume louder or softer.

Lens adjustment dial

Scroll the wheel to adjust the lens spacing for a better viewing experience.

Lens adjustment dial.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more