6. Powering down FLAIM Extinguisher

Important Logo White.svg

Important: FLAIM Extinguisher must be powered down after each use.

 

  1. Remove the VR headset from head.
  2. Push and hold the power button at the back of the headset for about 5 seconds. The power light will turn off.

    Headset power on button.jpg

  3. Place the VR headset into the case.
  4. Remove the USB leads from the external display.
  5. The hose tracker and trigger assembly will automatically power off.
    Important Logo White.svg

    Important: Ensure when you shake the trigger assembly that it doesn't turn back on again. If it turns on, press and hold the power button until it turns off.
    Trigger Assembly Controller Power On Button.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more