9. Updating FLAIM Extinguisher

Updating FLAIM Extinguisher

Complete the following steps to update the FLAIM Extinguisher:

1.

Connect the VR headset to a Wi-Fi network (see step 7 of the Setting up the FLAIM Extinguisher article for instructions on how to do this).

2.

Open the FLAIM Launcher and check for updates on the right side of the screen.

FLAIM Extinguisher Updates.jpg

  • If an update is available, select the Update button.
  • If nothing appears, then your system is up to date or there may be an issue with your internet connection.
3.

Keep your device powered on and connected to Wi-Fi while the update is being installed.

4.

Once the update is complete, launch the latest version of FLAIM Extinguisher.

 

Updating firmware

Complete the following steps to update FLAIM Extinguisher firmware:

1.

Connect the VR headset to a Wi-Fi network (see step 7 of the Setting up the FLAIM Extinguisher article for instructions on how to do this).

2.

If the headset detects that a firmware update is available, the following prompt will appear within the FLAIM Launcher:

Firmware Update message.jpg

Note: If the update is cancelled, it will be available within the Updates panel. If the firmware button within the Updates panel is pressed, the firmware prompt will re-appear.

Updates message.jpg

3.

Select Update.

The update process will then begin.

Firmware update message progress.jpg

Note: The device will automatically reboot once it has fully downloaded the new firmware.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more