Reset Screenbeam Configuration

Follow the initial TV Setup found here before progressing

1. Wait for the ScreenBeam to finish booting. When booted you will see a window featuring the receiver name that is ready to connect.

2. On a windows PC open up the ScreenBeam Configurator (Win 10) application.

3.  

   Press the “Windows K” on the keyboard to get the connect window to appear. Look for the corresponding receiver name of the ScreenBeam. Click on the name and it will begin to connect.

4. Wait for the ScreenBeam to connect to your PC.

5. On the ScreenBeam app click the “Refresh” button and wait for the connection.

6. In the “General” tab, adjust the receiver name. Change the name to “FLAIM03XX” with the XX being the next unallocated serial number. Click Save. The following text will appear on the bottom.
   

7. Click on the “One Touch Play” tab. Turn on One Touch play by

   adjusting on the slider. The following text will appear on the bottom.

   
8. Click on the “Screensaver” tab and select Browse. Scroll down and find the “FLAIM_International-Logo BLACK” and open it.

9. Click the Apply button and the following text will appear on the bottom. Click save. The following text will appear on the bottom.

10. Click on the “Background” tab and select Browse. Scroll down and find the “HDMI Connector splash screen TEST” and open it.

11. Click the Apply button and the following text will appear on the bottom.

12. Click on the “TV screen size” tab. Adjust the slider to a screen size of “13”

13. Click on the “Maintenance” tab. Click the reboot and confirm reboot by clicking reboot. Wait for the receiver to reboot. The HDMI receiver should now have the new settings applied.

Internal Doc :
https://flaimsystems.sharepoint.com/:b:/s/TeamFLAIMsite/ESjx2szYEo5NvAVZ80ndmygBUwy6QnfFLX-xixknEQPfag?e=aH5GAv